Hardware Testing Guide
Logitech C920 & C922 Webcam Test & Diagnostic Tool
Start the test below to check your Logitech C920, C920s, C920x, C922 or C922x. The tool reports the resolution and frame rate your camera is actually delivering, so you can compare it against the official specification underneath and see whether you are getting full performance.
Live Readout
Live Logitech C920/C922 Diagnostic Readout
- Camera:—
- Resolution:—
- Frame Rate:—
- Aspect Ratio:—
- Microphone Detected:—
These are the values your browser negotiated with the camera just now, not the numbers on the box. A difference between the two is exactly what the guidance below is for.
Expected Performance
Logitech C920/C922 Specifications & Expected Performance
Both cameras share the same sensor and 78° diagonal field of view. The single meaningful difference is that the C922 can drop to 720p in order to reach 60fps; the C920 cannot.
| Model | Max resolution & frame rate | Field of view / notes | Features |
|---|---|---|---|
| Logitech C920 / C920s / C920x | 1920×1080 at 30fps | 78° diagonal | Autofocus, dual stereo mics |
| Logitech C922 / C922x Pro Stream | 1920×1080 at 30fps, or 1280×720 at 60fps | 78° diagonal | Autofocus, dual omnidirectional mics |
The C920s adds a physical privacy shutter. The C920x and C922x are identical hardware bundled with an XSplit licence. All of them behave the same in this test.
Troubleshooting
Common Problems With This Camera
1. The blue tint or "underwater" look
The problem: The C920's automatic white balance frequently overcorrects under mixed indoor and natural light, pushing skin tones and the whole background toward blue.
The fix: Disable automatic white balance in your camera software and set the temperature manually, somewhere in the 5000K–6500K range for most rooms. Because the setting is stored per-application on some systems, check it in the app you actually use for calls.
2. Autofocus hunting and soft video
The problem: The lens visibly searches in and out, most noticeably in low light or against a low-contrast background. It is the single most reported C920 complaint.
The fix: Turn autofocus off entirely. Sit at your normal distance, adjust the manual focus slider until your face is sharp, then save the profile. This eliminates hunting permanently. More light also reduces it, because autofocus relies on contrast to lock.
3. Settings reset every time you restart
The problem: You adjust brightness, focus or white balance, then everything reverts to default after a reboot or when opening OBS.
The fix: This happens when the camera is running on the generic Windows UVC driver with no Logitech software present to reapply your profile. Install the official Logitech software and allow it to run in the background, which restores your saved settings on each start.
Software
Which Logitech software should you use?
Logitech has consolidated its software over the years and older utilities such as Logitech Capture have been retired for some models. If a guide references an application you cannot find, check the official downloads page for the current replacement.
Official Logitech support downloadsFAQ
Frequently Asked Questions
Related Guides & Tools
If you need 1080p at a full 60fps rather than dropping to 720p, that is the Logitech StreamCam.
For auto-framing and a rotating privacy shutter in a similar 1080p class, see the Logitech Brio 500.
Other hardware guides: Logitech Brio 4K test · Logitech C270 and C310 test · All hardware testing guides
Going further: low-light benchmark shows how this camera behaves as light drops, the microphone test covers the audio side, and the fix plan ranks everything by impact.